Auto Hill Hold Start Assist SET - Wire Harness + button for AUDI Q3 F3

Hill Hold / Auto Hold / Hill Start Assist - 83A927225C

Producer: Carsystems

Price: 109.99 EUR including VAT

Lead time usually up to:

24h

Costs of shipment:

GLS Standard - after 12 pm next day shipping 12.00 EUR brutto
UPS Standard - usually 1-5 days 20.00 EUR brutto
UPS Express - Europe - usually 24/48h 40.00 EUR brutto
UPS Express - Worldwide - usually 3-7 days 35.00 EUR brutto
UPS / GLS Standard - only in Poland 24h 4.00 EUR brutto

Availability:

Producer’s code:

CRS.83A927225C.SET

Product description

AUDI Q3 F3 - Auto Hill Hold Start Assist SET

- Harness + button

Extremely comfortable system into your car.

Your AUDI Q3 will automatically stand in place without having to press the brake pedal.

Retrofitting the Original Hill Hold / Auto Hold / Hill Start Assist is possible on AUDI Q3 with automatic transmission.

Product description:

You can stand on a slope WITHOUT BRAKE PEDAL, without rolling backwards or forwards.
You can leave the automatic selector lever on D / S and off the brake - the vehicle ALWAYS stays in place without moving - by pressing the accelerator pedal your AUDI will start again immediately (even with the start / stop system switched on).
With manual switches, it is sufficient to operate the clutch when the gear is engaged OR as with automatic models, to operate no pedal at all.
You no longer need to apply the parking brake if you e.g. want to get out of the vehicle shortly etc.
If you park your AUDI you no longer have to use the handbrake - after removing the ignition key (or keystroke on KeylessGo) the engine stops and the parking brake automatically closes (the handbrake activates).
You can activate or deactivate the system at any time by pressing a button on the new button.
A very comfortable special equipment for your AUDI.

Suitable for:

AUDI Q3 F3

Note:

After installation you need to code the system. Please contact an Audi dealer or workshop with diagnostic software.

Scope of delivery:

Wiring Harness Set
Auto Hold button 83A927225C

WARNING:

Please note vehicles starting with model year 2024
with installed PR number NI8 (NI8 = Without UNECE CS (R155) and SU (R156) with SFD2-SG)
or installed PR number NI7 (NI7 = With UNECE CS (R155) without SU (R156))
or installed PR number NI9 (NI9 = With UNECE CS&SU)
or installed PR number NI1 (NI1 = With UNECE CS&SU).

Unfortunately, it can be that these models cannot be retrofit or activated at this time.
Please take this information into consideration before purchasing and contact us providing the VIN to check.

+48 600 369 000

support@carsystems.eu